H70 nozzles overlay MPa; Imagen 4 is 4cr, 4K, text-only

ev-charger-oem already locked the unit photo. H2 leftover is the H70 nozzle still with overlay MPa as authored type. Imagen 4 is 4cr, 4K, text-only for the spec board; Veo digits on a nozzle are a fake pressure class.

A hydrogen dispenser leftover that ships is this nozzle: H70, 70 MPa, the latch and colourway you actually stock. Pressure class is type you typed. It is not a cousin H35, and it is not a garage wall the EV-charger post already refused. Photograph the nozzle. Stamp 70 MPa. Leave the charger faceplate to the factory post.

The EV charger unit photo is already spent

EV charger factories lock the unit photo, not a garage already owns the catalog shot: inlet family, amperage marking, cable hang, LED ring, the badge on the faceplate you actually ship. Animate that still. Do not invent drywall. That is an EV-charger OEM job. This page is leftover H2 hardware.

Do not rewrite that post as a nozzle. Do not hang an H70 on a generated garage. Two SKUs are two stills. If the brief names NACS, J1772, or a wallbox amperage, you are on the charger post. If it names H70, 70 MPa, or a hydrogen coupler, you are here.

Manufacturers is the plant page. Sparks do not typeset 70 MPa. Photograph the nozzle you would print on a cut sheet: square-on or three-quarter, latch in frame, colour true, no invented type on the body. H35 and H70 are different classes. If the still is H35, every second of video is a mis-ship of H70. Empty of people is the spec. Crop a gloved hand.

Overlay MPa as authored type

Pressure class is a claim. 70 MPa, H70, the string on the sheet — those digits are why a station buyer pauses. A 70 that becomes a 35 for six frames is a different nozzle. Video models redraw letterforms every frame. Text you cannot afford to get wrong does not live inside the motion.

Do not ask a video model to typeset either. Write the prompt as a clean plate: the photographed coupler, no readable MPa if the still cannot hold it, no invented class. Then put the real string on later.

Add a text overlay burns one authored line for the whole clip — top, center, or bottom. That is 70 MPa, H70, a CTA. It does not transcribe. Overlay after picture lock. Swap 70 MPa for an H35 leftover without regenerating the body — and only if you actually stock H35, as its own still.

If the physical stamp is already in the still and it is this nozzle, keep it. If the letters are wrong, crop or overlay. Do not "sharpen the stamp" inside a generate. Do not prompt "H70" onto an H35 body.

A mute nozzle has nothing to caption. Auto-captions listen. Running a transcript pass hoping "70 MPa" appears is a spend on silence.

Imagen 4 is the spec board, not a nozzle edit

Imagen 4 is Google's text-to-image row: 4 credits, 4K, photoreal, text-only. Category is text-to-image. There is no duration list. Audio is null. requires_image is false: you type, you get a 4K file. It cannot ingest the nozzle photo. It will not lock identity on a coupler you already shot.

Use it for a closed spec board — the MPa line, the class word, a diagram that is labelled as a diagram — when you need a still that is type, not the metal. Run it from text-to-image. Quote the strings you will actually print. Proof at 100%. A 70 that lettered as 700 is a different unit system, not a cinematic upgrade.

Do not prompt Imagen 4 to "match this H70 nozzle." Text-only is the constraint. You will get a cousin coupler. If you already have the nozzle photo, you are not on Imagen 4 for the metal. You are on overlay for the MPa.

Aspects include 16:9, 4:3, 1:1, 3:4, 9:16, and auto. Pick the ratio the board will actually ship. Imagen 4 is the photoreal still for a board you are willing to call a render. The nozzle photograph stays first.

Veo digits on a nozzle are a fake pressure class

Veo 3.1 is native audio, official 4K tier, 4 / 6 / 8 second clips, listed 40 credits. It is a good model for cinematic physics and a talking plate. An H70 catalog is none of those. Native dialogue does not sell a pressure class. A 4K coupler with letters the model guessed is a prettier lie.

Veo does not become a nameplate engine because the prompt said "simple hydrogen nozzle." You asked for a scene. The glyphs on the body will be atmosphere. Those digits are a fake pressure class. A 4K invented H35 labelled H70 is still the wrong class.

Do not prompt "technician explains 70 MPa over the nozzle." Do not generate a filling car so the coupler has a scene. If a real named engineer must speak, film that person on a different day.

If you need motion on the photographed nozzle, animate that file after picture lock. Prompt only the camera. Do not re-describe the class. Pause on the latch. If it is not the SKU sheet, go back to the still.

FAQ

Can Imagen 4 ingest the nozzle photo and letter 70 MPa onto it?

No. Imagen 4 is text-only, 4 credits, 4K. It cannot hold this coupler. Use it for a spec board you will label as a render. Photograph the nozzle. Overlay the MPa after lock.

Where does 70 MPa go if it cannot live in the metal?

Type it. Add a text overlay burns one authored line, whole clip, top / center / bottom. Classes change; the coupler should not. Prompted glyphs are a miss you regenerate to fix.

Is this the same job as the EV charger factory post?

No. That post is the charger catalog shot, empty of a garage you did not photograph. This leftover is the H70 nozzle plus authored MPa. Both lock the SKU. They are different plates. Do not hang an H70 on the charger still.

Can Veo stamp H70 on the nozzle so it feels certified?

No. That stamp is a picture of a number. It will not match the sheet, and you cannot file it as a pressure class. Overlay the line from the sheet. Veo 3.1 is the 4 / 6 / 8 second talking and 4K row, not a typesetter and not a listing lab.