Fluid-bed bowls boil in MiniMax H3, 2K, 26 credits

MiniMax H3 text-to-video is 2K, 5–15s, 26cr, audio null: particle boil on the photographed bowl and distributor plate, then overlay inlet °C — a model-minted temperature is a fake batch record, and spray-dryers are a different tower.

A fluid-bed listing a buyer can match is this bowl, this distributor plate, the inlet plenum you actually ship. Particle boil is motion you are allowed to buy once the geometry is true. A temperature that appears in the generate is a batch record nobody logged. Shoot the bowl. Animate the boil. Stamp the inlet. Leave spray-drying to a different tower.

The bowl and distributor plate are the SKU

Procurement already knows the category. What they need is the bowl they quoted: diameter, sight-glass, the plate perforations, the plenum height. Text-to-video of "a pharmaceutical fluid-bed dryer in a gleaming suite" invents a cousin bowl and a temperature the model guessed. That is a different SKU.

Photograph the approved unit like a line card. Square-on of the bowl, a three-quarter that still reads the distributor plate, even light, no invented operator. Crop a handwritten setpoint you would not put in a listing. Do not prompt a model to "clean" product off the glass. Erasing powder redraws the steel behind it.

Keep people out of the generate. Empty is how a buyer reads the hardware. A constructed process engineer walking "what inlet you should run" is a presenter you did not hire.

The AI product video generator is the hardware contract: reference photos are the ground truth. Zoom to 100% and read plate marking and a model badge before you keep a take. Fine text is the first thing a generator loses. Hold the photographed bowl next to the generate. If the freeze-frame would fail a cut sheet, the clip is a miss.

Manufacturers is plant-floor capability: line rate, QC, recruitment. This leftover is one bowl on a locked plate. Do not rewrite that page as a catalog clip. Do not ask a cinematic row to stand in for the plant you did not shoot.

MiniMax H3 is 2K text-to-video at 26 credits

MiniMax H3 Text to Video is the published 2K row: text-to-video from a prompt alone, listed 26 credits, 5s through 15s in one-second steps, six aspects (21:9, 16:9, 4:3, 1:1, 3:4, 9:16), qualities 768P and 2K, audio null. Catalog resolution is 2K. Do not promise a 4K master from this slug. Do not invent /models/minimax-h3-image-to-video. The live page is this T2V card.

Audio is null. Do not claim native sound. Quoted plant talk in the prompt does not become a soundtrack. Inlet strings will not letter themselves. Score later if you want a bed. Keep lips out of frame because there are no lips to begin with.

Generate a video from text is the named T2V job: you describe the shot, the agent asks duration, aspect, and resolution, then picks a model — or the one you name. Cost is priced per model, shown before you confirm. Name MiniMax H3. A bare "make a dryer video" will land on a talking plant tour.

Write the prompt as camera and physics on this geometry, not a new machine. Particles fluidise above the photographed plate. Bowl holds. Camera locked. No new sight-glass. No new plenum. Do not re-describe the SKU as "a modern fluid bed." Re-describing is how the model draws a second tower.

Start at 5s or 6s. Fifteen seconds of the wrong bowl is a long miss. Inspect the midpoint. Ends can look like a dryer while the middle restamps the plate. If a face appears, throw the file away.

Set the aspect from the placement, not from habit. 16:9 for a line-card cut. 9:16 for a vertical listing. 1:1 if the dealer grid is square. "Cinematic widescreen" in prose does nothing if the control is still 9:16. 768P is a draft. 2K is the listed catalog ceiling. Do not promise 4K from this slug.

The photograph is still the identity check. MiniMax H3 does not ingest it. If frame one must be the JPEG you approved, that is image-to-video on a different published row. This leftover is the 2K boil when the brief is particles and light on a bowl you can proof against the still.

Overlay inlet °C; a minted temperature is a fake batch

Inlet temperature is a claim. 60 °C, 80 °C, 120 °C — those strings are why a buyer opens the batch record. An 80 that becomes a 180 for six frames is a mis-ship. A model-minted thermometer is not a logger.

Write the video prompt as a clean plate. Dark glass, no readable °C, no invented ultimate. Then put the real string on later.

Add a text overlay burns one authored line for the whole clip — top, center, or bottom. That is the inlet you actually run, the bowl SKU, a CTA. It does not transcribe. A mute boil has nothing to listen to. Overlay after picture lock. Swap the inlet for the next recipe without regenerating the bowl.

Do not:

• Prompt "the inlet display reads 80 degrees clearly."
• Ask the model to "show the batch record."
• Use auto-captions hoping the transcriber invents a setpoint nobody logged.

Glyphs inside a motion pass are uneditable. Certificates and recipes change; the bowl should not. One persistent badge is a single overlay on the whole file. A live logger with a real reading is a different object, and only if you photographed it.

Because audio is null, this clip is silent unless you score it later. Do not write a plant lecture into the MiniMax prompt and wait for a voice. The flag is empty. It will not flip.

Spray-dryers are a different tower

A fluid-bed bowl is a distributor plate and a particle boil. A spray-dryer is an atomiser, a tall chamber, a cyclone. Those are different iron. Do not prompt "spray-dry tower with fluid-bed bowl" and hope the model picks a SKU. A cousin tower with a pretty mist is a mis-ship.

Do not import a spray-dry cyclone into this leftover so the edit has B-roll. Do not generate a talking operator who "switched after the other dryer caked." Nobody said it. If the brief contains "bowl" and "distributor plate," you are on this page. If it contains "atomiser" or "cyclone," you need a different still.

The test is who has to recognise the object. If it is a process engineer matching a bowl, you are on the photographed plate plus an authored inlet line. If it is a plant tour, you are on the manufacturer page. One generate cannot be both.

Pause on the plate. Read the perforations. If the freeze-frame would not pass the cut sheet, the video will not pass the suite. Overlay the inlet. Skip the minted thermometer. Leave the spray-dryer off this bowl.

FAQ

Can MiniMax H3 ingest the bowl photograph?

No. The published row is text-to-video from a prompt alone. Use the photo as the identity you proof against. If frame one must be that JPEG, run image-to-video on a live I2V slug. Do not invent a MiniMax H3 I2V URL.

Does H3 add a plant lecture if I write one into the prompt?

No. audio is null. You get a silent 5s–15s file at 2K for 26 credits. Quoted VO does not become a soundtrack. Overlay the inlet after picture lock. Score later if you want a bed.

Where does inlet temperature go?

Type it. One authored overlay after picture lock. Recipes change; the bowl should not. Prompted °C on the glass is a fake batch record you regenerate to fix.

Can I reuse this clip as a spray-dryer tour?

No. A spray-dryer is a different tower: atomiser, chamber, cyclone. This leftover is particle boil on a fluid-bed bowl. Photograph that bowl. Overlay that inlet. Do not morph the SKU in flight.