HDD drill-rod spin transfers on Wan 2.2 Move at 8cr

This is a horizontal directional drill, not well-rigs' MiniMax vertical. Wan 2.2 14B Move is 8cr at 720p: transfer a known rod-spin clip onto the photographed rack; do not regenerate a different mud-motor.

An HDD listing that books is a rack of this drill pipe, this saver sub, this mud-motor housing on a machine that lives on a right-of-way. Vertical well-rig ads buy a 2K mast from a paragraph. This job copies a spin you already filmed onto a still you already approved. Do not ask a text-to-video row to invent a different motor because both machines "drill."

Horizontal, not a MiniMax mast

Well rigs are MiniMax H3 2K, not geologists already spent the vertical plate: MiniMax H3 is 2K text-to-video, 5–15s, 26 credits, audio empty, the mast against sky. That is allowed when a generic derrick is enough. HDD is not that machine. The pipe is horizontal. The rack sits on a crawler or a trailer. The mud-motor is a bent housing with lugs a contractor already quoted.

Photograph the unit you sell. Square to the pipe rack, or a three-quarter that still reads rod boxes, the vice, the motor. Crop a crew you did not hire. Text-to-video of "a directional drill spinning rod on a suburban street" invents a cousin crawler and a different motor. The buyer matching iron will see it before they see your logo. A constructed hydrologist or photoreal crew does not belong in this generate. The rack is the SKU. Do not twin the derrick.

Wan 2.2 14B Move is 8cr at 720p

Wan 2.2 14B Move is the transfer row: category motion-control, image required, max output 720p, listed 8 credits. Catalog audio is unset. There is no duration enum. Length follows the driving clip. Trim that file first.

Two uploads, or it is not this job:

1. The rack still — identity. Framing matched to the performance. A tight badge against a full-rack spin is how the transfer looks like a different machine.
2. A rod-spin driving clip — motion. A real rotation you have rights to: pipe turning in the vice, a motor spinning on a test stand, one machine in frame. A messy right-of-way pan with three units and a whip will transfer mess.

Transfer a dance or motion onto my photo is the named agent job for this pair: photo in, driver in, retargeted motion out. Cost is priced per model, shown before you confirm. AI motion transfer is the tool-shaped door. Motion control copies timing you already captured. Text cannot replace the clip.

Prompt travel only. "Hold the rack, copy the rod spin, camera locked, no new motor." Stop. "HDD rig, cinematic mud, suburban bore" restages the iron. 720p is the ceiling. Do not brief a client on 1080p from this SKU.

Do not regenerate a different mud-motor

The failure mode is a beautiful spin of a cousin housing. Lugs that walk. A bent housing that straightens. A box-end that fattens. Those are claims. A contractor who already quoted the motor will notice.

Do not prompt "make the motor look heavier." Heavier is a different part. Do not interpolate a 2-7/8 motor into a 6-3/4 cousin. Two different objects is a morph, and this page is not first-last.

If you do not have a driving clip of a spin you would actually copy, you do not have this job. Ordinary image-to-video will wiggle the rack and invent rotation. That invented spin is not the physics you sell.

The driver should be a unit in the same family: pipe diameter in the same neighbourhood, motor in the same housing class, readable, one machine. A vertical kelly spin from a well pad is the wrong physics. The still is your rack; the driver is the spin. A loop of the same still is ambient motion, not a spin demo.

The image-to-video door is not this transfer

Image-to-video is the still-to-motion door when there is no driving clip: one photo, invented camera. Mixing those doors is how you pay transfer prices and receive an I2V take. If the brief is "orbit this crawler," stay on I2V. If the brief is "this rack must spin like that clip," you are on 14B Move.

Audio is unset — do not write a VO into the optional prompt and wait for a voice. Score later. Overlay a rod size after picture lock if the listing needs a string. Move will not typeset 5-inch pipe on the box.

Pause on the motor at the midpoint. If the housing would not match the line card, throw the take out. Reroll the motion, not a new mud-motor.

FAQ

Can I text-to-video a spinning rod and skip the rack photo?

You can. You will get a cousin crawler and a mud-motor you do not sell. HDD is the photographed rack plus a known spin. Wan 2.2 14B Move is 8 credits at 720p for that pair.

Does Wan 2.2 14B Move add a soundtrack?

No. Catalog audio is unset. Do not write dialogue into the optional prompt and expect a voice file. Plan sound after the transfer.

Is this the same job as MiniMax H3 well-rigs?

No. That post is a vertical mast from text, 2K, 5–15s, 26 credits, silent. This leftover is horizontal: a still of your rack and a driving clip of a rod-spin. Do not twin the derrick.

Can I describe the spin instead of attaching a driving clip?

Not for this job. The driver is the motion. A paragraph about RPM is a different generate, and a worse one when timing is the point. Missing the clip is ordinary image-to-video.