Push-to-connect fittings need a Vidu click, not a plant narrator
The SKU is the collet bite; Vidu Q3 I2V can carry the diegetic click from the tube insert, not a millwright voiceover.
The SKU is the collet bite. Vidu Q3 I2V can carry the diegetic click from the tube insert. A voiceover millwright is a different legal file. Connectors already covered the circular connector click; this is pneumatic push-in.
A push-to-connect listing is a tube hitting a collet and staying. The buyer stops for that sound, or they stop because the body stayed itself. Pick one. Do not generate a plant worker explaining insertion depth over a cousin of the fitting.
Photograph the collet bite
Macro still first: the body colour, the collet, the tube OD, the logo that will be on the bag. Photograph the part as it sits on the datasheet. It is not a paragraph about "satisfying pneumatic click, factory, millwright." Paragraphs invent ports.
AI product video is the door for a SKU still that has to move. Frame one is the file. Crop to the insert. A wide of a manifold hides the bite and invites a second body. Light it so the collet reads. Then decide whether this take is the click or the housing.
If the still would not go on the catalog page, stop. Every second of video from a melted collet is waste. Do not prompt the part number onto the body. Overlay it later if the stamp is the claim.
This is not plumbing PEX in a kitchen wall. This is pneumatic push-in: air tube, collet teeth, a bite you can hear. Plumbers already have an audience page for local install stories. Do not copy a PEX-in-the-wall prompt onto an OEM pneumatic body.
Vidu Q3 I2V owns the click
Vidu Q3 Image to Video turns a static image into a clip. Image required. Audio true. Max output 1080p (360p / 540p / 720p / 1080p listed). Durations are only 5s, 10s, and 15s. Sixteen credits is the listed figure; the row is discounted. Aspect comes from the still — crop before upload.
Write the click into the 5-second prompt if the click is why someone stops: tube seats, collet bites, housing settles. That is diegetic sound with the picture, not a SFX library you lay later, and not a millwright VO. It is still I2V, not lipsync. Five seconds is the shortest legal take on this ladder. If motion fails in five, you do not have a 3-second cheaper retry on this slug.
generate_audio belongs on. A silent brief still gets a mix. If you needed mute, you needed a different row. Use Vidu when the product is the insert sound. A body nobody would recognise with the sound off belongs on an identity hold instead.
Prompt the insert, not a factory. "Tube pushes in, collet closes, camera locked, no people." Stop. "Dave from assembly explaining why our bite is tighter" is a second job.
This is not the circular connector listing
Connectors: macro still, then Vidu for the click if sound matters already owns circular / electrical click: pin, latch, housing, diegetic click versus identity on a connector SKU. That page is not this page.
Pneumatic push-in is a different bite. Different tube, different collet, different datasheet. Do not reuse a circular-connector still and hope Vidu "finds air." Do not brief "connector click" and ship a keyed circular shell. The buyer who specifies push-to-connect for a pneumatic line will notice the wrong family before they notice your logo.
Same Vidu row. Same 5 / 10 / 15 ladder. Same rule: pick click or identity before you generate. Different still. Different SKU. If you need both a perfect housing and a perfect click in one file, pick one generate as the hero. Comp a SFX bed onto an identity pass if you must. Do not interpolate two models and call the middle the part.
A plant narrator is a different legal file
A constructed millwright talking insertion depth, torque, or "what you should spec" is a mouth you did not hire. It is a private-person problem if you seeded a real assembler. It is a plant tour you did not film if you invented one. Either way it is not the collet.
Manufacturers already sit on a content program for plants, booths, and channel kits. That page is not a pneumatic fitting listing. A factory walk is a different brief from a 5-second bite. Do not glue a talking rate card or a talking assembler onto the insert file inside one generate.
If a catalog needs a voice, that voice is a real named person on a different day, with a grant that covers this use. Generation can still do the tube. It cannot be the millwright.
Overlay the dash size, the OD, the "push-to-connect" line you will stand behind. Vidu will not typeset it. The click is audio. The spec is type.
FAQ
Can I run Vidu without the fitting photo if the click is the point?
No. Image is required. Aspect comes from that file. A sentence about a click invents a body. Photograph the collet, then write the insert into the 5-second prompt.
Is this the same job as the circular connector click post?
No. That post is circular / electrical click versus identity. This is pneumatic push-in: tube, collet bite, air line. Same Vidu I2V row (5 / 10 / 15s, 1080p, native audio, 16 credits listed, discounted). Different SKU. Different still.
Why not a talking millwright on a premium talking row?
Because the product is the bite, not a mouth. A generated assembler is a private-person file and a plant tour you did not shoot. Overlay the spec. Film a real named person only if the catalog actually bought a voice.
Why not a 3-second Vidu hit?
This ladder is 5s, 10s, 15s. The shortest test is five seconds. If you needed three, you needed a different I2V row.