Stirrup benders form hoops on Wan 2.6 Flash, 5–15s, 1080p, 8cr, audio off

A straight bar to a closed stirrup forms on Wan 2.6 Image to Video Flash, 5s, 10s or 15s, 1080p, 8cr, audio false.

A stirrup-bender listing that books is this head: mandrel, pins, the bar path a fabricator will match to a bending schedule. It is not a talking operator walking hoop dimensions, and it is not a cousin bender with a different pin set. Photograph the machine. Let Flash form the hoop on that iron. Type the spec after lock.

Photograph the bender you sell

The honest plate is the unit you ship. Same pin layout, same mandrel diameter, same guard a buyer will match to a cut sheet. Crop the rest of the yard if the yard is not the SKU. A paragraph will mint a prettier bender with a different pin count and a cleaner paint job.

Shoot the approved machine like a line card. Square-on or a three-quarter that still reads the pins. Bar in the still if you already loaded this diameter. Empty of people. If the only photo includes a fabricator, crop them or shoot again.

Turn a photo into a video is the named one-still verb: photo in, clip out. It is not first-last. It is not a talking avatar. It is this: the bender you uploaded, moving. Cost is priced per model, shown before you confirm.

Image-to-video is the launcher. Frame one is the file. Prompt camera and physics only: bar feeds, hoop closes, camera locked, no new pins. Re-describing “automatic stirrup bender forming 10 mm hoops” on top of the pixels is how the model draws a second head.

Manufacturers is the plant page — chips, a line, capability. That playbook is not this head. This page is one bender, one hoop form.

Keep the pins large. Fine iron is the first thing a generator loses. If the still would not go in a distributor PDF, do not animate it. Fix the plate. Then buy motion.

Flash forms the hoop silently

Wan 2.6 Image to Video Flash is the motion row: image required, ultra-fast I2V, audio false, 5s / 10s / 15s, 1080p, 8 credits. The file is silent. That is the point. Quoted shop noise in the prompt does not become a soundtrack. Hoop dimensions will not letter themselves. Score later if you want a bed. Keep lips out of frame because there are no lips to begin with.

Requires an image. A text prompt with no file is a different category. Flash will not invent this bender from a sentence.

Start at 5s. There is no 6s, no 8s, no 2s test. A 5-second generate is the draft. 10s is the default ship length. 15s is the hold. Fifteen seconds of the same collar is a long miss if the pin set already drifted at second two. Cutting a 15s Flash take down to 6s in an editor is fine; paying for 15s because you wanted 6s and the slider felt adjacent is not.

Ceiling 1080p. Aspects are inferred from the still — lock the crop before you generate.

Prompt the travel: straight bar in, closed stirrup out, camera locked, no new mandrel. Do not prompt a person onto the deck. Do not prompt the pins to grow. Hardware the model invents is a different machine.

Inspect the midpoint. Ends can look like the still while the middle restamps the pin count. If a second head appears that was not in the still, throw the file away. If a face appears that was not in the still, throw the file away.

Do not morph bar size or hoop geometry

Bar diameter, bend radius, and closed-hoop shape are claims. The still already contains the iron those claims sit on. A generate that “forms” by thickening the bar, shrinking the mandrel, or closing a rectangle into a circle you do not sell has sold a different stirrup. That is not cinematic product. That is a capability claim you did not photograph.

Do not prompt “tighter hoop so the form shows.” Do not crop the head so small the model invents a second pin. Do not first-last a straight bar still to a finished hoop still from a different machine. The middle of that interpolate is a third product.

If you photographed a loaded bar, hold that diameter. If you photographed an empty head, Flash may guess a bar. Empty is still more honest than a 16 mm guess on a 10 mm listing. Load the bar. Photograph it. Then form.

Ultra-fast is for iteration on a picture that already survived review. It is not for discovering whether the bender is the right bender. A wrong 15s Flash clip is still a wrong clip, just a faster one. Eight credits on a melted pin set is still a melted pin set.

Overlay the spec; skip a talking operator

Hoop size, bar grade, a SKU string — those are authored lines. Add a text overlay burns one line you wrote, whole clip, top / center / bottom. It does not transcribe. A mute bender has nothing to caption.

Do not ask Flash to typeset “Ø10, 200 × 200” on the guard. Prompted glyphs are a miss you regenerate to fix. Keep the iron clean. Burn the real string after picture lock.

A constructed fabricator pointing at a hoop and prescribing a schedule is a presenter you did not hire. Contractors is the jobsite page — a crew, a pour, a fix you already film. Do not rewrite that /for onto OEM. Do not drop a generated labourer at the bender so the machine “looks busy.” If a real named applications person must speak, film that person on a different day. Generation can still form the hoop. It cannot be the crew.

Silent head. Overlay the spec. People stay off the generate. Pause on the pins: is the count still the count? If a lab coat or a hard hat has arrived, throw the file away.

FAQ

Can I skip the photo and prompt Flash to “match our stirrup bender”?

No. Flash requires an image. A sentence is not a plate. Upload the head. Describe only the bar travel.

Does Wan 2.6 Flash add a shop soundtrack if I ask for a rebar bed?

No. audio is false. You get a silent 5s, 10s, or 15s file at up to 1080p for 8 credits. Lay sound after picture lock. Do not prompt a clang and call it a mix.

Can I run 8 seconds?

Not as a listed duration. Choose 5s, 10s, or 15s. Trim in an editor if you need a length between those three.

Where do hoop dimensions go if they cannot be in the prompt?

Type them. One authored overlay after picture lock. Schedules change; the pin set should not. Prompted glyphs are a miss you regenerate to fix.