Vacuum pumps overlay Torr; Seedance 2.5 holds the can
I2V the photographed pump on Seedance 2.5 via the image-to-video tool (4–30s, 720p, 47cr). Never link a folded Seedance I2V URL. Overlay ultimate vacuum as authored type; native audio on that family is not a millwright lecture. This is not peristaltic-pump-oem's roller squeeze.
I2V the photographed pump on Seedance 2.5 via the image-to-video tool (4–30s, 720p, 47cr). Never link a folded Seedance I2V URL. Overlay ultimate vacuum as authored type; native audio on that family is not a millwright lecture. This is not peristaltic-pump-oem's roller squeeze.
A vacuum-pump listing a buyer can match is this can: inlet, oil sight, the coupling guard, the housing colour you ship. Ultimate vacuum is a number from a sheet you already published. Motion is allowed on the photographed can. Stamp Torr after lock.
Photograph the can. Then I2V.
Dealers compare the ad to the line card. Flange size, number of stages, oil-sealed or dry, the badge. Text-to-video of "an industrial vacuum pump in a clean lab" invents a cousin skid and a Torr plate the model guessed.
Photograph the approved pump like a spec sheet: square-on or a three-quarter that still reads the inlet, no invented operator. Do not prompt the model to "clean" the bench. Erasing a pallet redraws the metal behind it.
Image-to-video starts from that file. Frame one is the contract. Prompt camera and physics: a slow orbit, a hold on the inlet. Do not re-describe the pump. Re-describing is how the model draws a second housing.
Turn a photo into a video is the named one-still job: attach the catalog jpeg, describe the hold, pick an image-to-video model. Cost is priced per model, shown before you confirm. It is not a millwright VO.
Seedance 2.5 is the family hold: 4s–30s in one pass, 720p ceiling, listed 47 credits, native audio. I2V is the still-to-motion job on that family. The published URL is this page, not a second Seedance slug. Do not invent a folded I2V path. Stitching four short clips is how the inlet jumps. Iterate at 4s or 5s until the can holds. Thirty seconds is the identity ceiling, not a default.
Overlay Torr as authored type
Ultimate vacuum is a claim. The string you already print — Torr, mbar, Pa, whichever unit the datasheet uses — has to survive a pause. Video models redraw letterforms every frame. A 2 that becomes a 7 for six frames is a mis-ship.
Write the video prompt as a clean plate. Dark gauge glass, no readable Torr. Then put the real string on later.
Add a text overlay burns one authored line for the whole clip — top, center, or bottom. That is the ultimate-vacuum figure, the model string, a CTA. It does not transcribe. Glyphs inside the Seedance pass are uneditable. Overlay after picture lock. Swap the string for the next SKU without regenerating the housing.
Do not ask Seedance to letter Torr on the can. Quoted numbers in the prompt do not become a title card. Reports change; the can should not.
Native audio is not a millwright lecture
Seedance 2.5 generates native audio with the picture. Write a quiet plant floor, a faint motor bed, or silence. A silent brief still gets a soundtrack you did not choose. Quoted VO about "what you should spec for this chamber" is how you get a mouth you did not cast.
A constructed millwright prescribing ultimate vacuum is a presenter you did not hire. Put a real named person on camera when the video tells a viewer how to size a unit — or do not tell them. Generation can still do the can. It cannot be the lecture. Do not prompt "engineer explains Torr over the pump." Keep lips out of frame. Spec numbers still go on as overlay.
Manufacturers is plant-floor capability: line rate, QC, recruitment. That is a factory talking about a factory. This listing is one can on a locked housing. Do not rewrite the manufacturer page as a catalog clip.
This is not peristaltic roller squeeze
Peristaltic rollers squeeze in Kling is already a post. That SKU is a head: roller count, occlusion, tube inner diameter. Silent Kling for the pinch. Vacuum OEM is a different pump. Do not copy roller-squeeze prompts onto a rotary or dry can. Tube ID is not Torr.
Do not morph inlet geometry — a KF that grows a CF is a different flange. Do not morph stage count. Do not grow an oil sight on a dry can you do not sell. If the generate redraws those, it is a mis-ship. Leave the tubing race to the peristaltic listing.
If a distributor has to match a SKU, you are on the photographed can plus an authored Torr line. If a process engineer has to match a tube ID, you are on the other post. One generate cannot be both.
FAQ
Can I text-to-video a pump in a lab and skip the can photo?
You can. You will get a cousin housing and a Torr plate you did not print. OEM is the unit you photographed. Seedance 2.5 still-to-motion from that still, via the image-to-video tool, is the hold. The live model URL is Seedance 2.5, not a folded I2V slug.
Does Seedance 2.5 add a soundtrack if I do not ask for one?
Yes. Native audio is on. Write a quiet shop, a motor bed, or silence. A silent brief still gets a mix. Quoted millwright talk in the prompt does not become a title card. Overlay Torr after lock.
Where does ultimate vacuum go if it cannot be in the prompt?
Type it. One authored overlay after picture lock, top / center / bottom. Datasheets change; the can should not. Prompted glyphs are a miss you regenerate to fix.
Is this the peristaltic page with a different crop?
No. Peristaltic work is roller occlusion on a locked head still, silent Kling, tube ID that cannot morph. This page is a vacuum can on Seedance 2.5 with Torr as overlay. Different pump. Different row. Keep them apart.